Your partner in professional woodworking

+31 512 525090

Allwin endmatcher for parquet floor industry

This machine endmatches in trough feed up to 90 m/min. The reliable, economical, and quality engineered solution for end matched timber!

Available in two different models:
- EMA250
- EMA300

Machine features
PLC control combined with touch-sensing screen for maximum convenience of operation
Each cutterhead is driven by an independent powerful motor.
7500 rpm spindle speed.
Unlimited wood length.
Variable feed speed.
Cutter feed is controlled by a frequency inverter that permits variable speed change to suit various cutting conditions.
Pressure plates are actuated by air cylinders.
Hard chrome plated TABLE featurs maximum wear-resistance.
Table rollers increase feed smoothness.
Powered infeed roller conveyor is driven by a 0.37 kW motor.
3400 mm infeed roller conveyor and 2200 mm outfeed conveyor TABLE are standard equipment.
Fully enclosed splash guard.

Feed drive system	Cut tenon and mortise at a time	Tenoning and mortising cutterhead

The wood feed system is driven by a 0.75 kW motor and transmitted through worm gear / worm mechanisms. Feed speed is controlled by a frequency inverter, allowing for variable speed change.	The cutter mechanism consists of two cutterhead. The first cutterhead performs tenon cutting and followed with a second cutterhead for mortise cutting.	Both cutterheads are fitted with 14x14x2 mm knife inserts and 30x12x1.5 mm knives. Cutterhead bore is 40 mm in diameter.

The 3-head bandsaw from Allwin band saw is very good for cutting oak slats. The next machine we would buy again from Rehomy.