
Tool offset
Check offset values and reference points.

Presetting tools correctly helps reduce setup errors and rejected parts.

Check offset values and reference points.

Inspect the cutting edge visually.

Measure the dimensions you need for setup.

Check the radius of the tool profile.

Measure the cutting edge angle.
The stand has a holder for HSK/PowerLock tooling and an HSK/PowerLock adapter for conventional tooling. It can accommodate 40 and 50 mm spindles with the appropriate adapter.
Check the values in the measuring software and use the measurement data for setup.
The cabinet and monitor bracket pictured are optional.
| Feature | Gau Jing Tool Presetter |
|---|---|
| Controls | 24-inch touchscreen |
| Optical magnification | 20× |
| X-axis measuring range | 20–400 mm |
| Y-axis measuring range | 60–400 mm |
| Tool holder | HSK/PowerLock holder |
| Adapter | HSK/PowerLock adapter for conventional tooling |
| Software | Length, diameter, radius, angle, cutting edge inspection, line and arc comparison and JPG comparison |
| Data transfer | USB, network and optional compatible label printer. Confirm equipment with our team. |
Ask us to confirm availability, support and any software upgrades at delivery.
Yes. Ask us to check the holder and adapter for your tools.
You can transfer data through USB or over a network. Ask us about setup for your machines.
Yes. The stand provides optical radius and angle inspection.
Tell us which cutterheads, holders and spindle sizes you use.